IEI Integration IVC-200G - Manual (Page 15)

15
3. Installation Procedures
3.1 Driver Installation
IEI driver installation program makes the driver installation of multiple cards an
easy job. The steps of driver installation are described as below:
Steps:
i. Adjust the jumper setting of the video capture card.
ii. Insert the video capture card(s) into the computer system, and then turn
on the computer.
iii. The system will find a new device on the system and ask you to install the
driver. Click Cancel to close the dialog box.
iv. Run the program ieisetup.exe from the IEI Installation CD.
v. The window will show a welcome message for installation. Click the Next
button for next step.
vi. The window will then show a message of current configuration, click Next
to start the installation.
vii. The window will show a message to warn you that the software does not
contain a Microsoft digital signature. Click Yes to continue the installation.
viii. There will be another window message to ask you to install an audio driver.
Click Yes to continue.