IEI Integration IVC-200G - Manual (Page 34)

34
The driver program and operation of PM-1056-16P/PG and IVC-120/G are the same.
PM-1056-16P/PG is the interface of PC/104-PLUS.
The driver program and operation of PM-1056-4P/4PB/4PG/4PGB and IVC-100/G
are the same. PM-1056-4P/4PB/4PG/4PGB is the interface of PC/104-PLUS.
PCI Signal Grouping Selection
• SW1 (Rotary Switch): Group selection of PCI configuration for PC/104-PLUS
modules
Group SW1 Position
0 0, 4
1 1, 5
2 2, 6
3 3, 7
• Signal Grouping Description
Group PCICLK ID Address INT0 INT1 REQ GNT
0 PCICLK0 IDSEL0 INTA INTB REQ0 GNT0
1 PCICLK1 IDSEL1 INTB INTC REQ1 GNT1
2 PCICLK2 IDSEL2 INTC INTD REQ2 GNT2
3 PCICLK3 IDSEL3 INTD INTA REQ3* GNT3*
*Note: REQ3# and GNT#3 are not signals defined in PC/104-PLUS.
Do not use MODE3 if your card does not have these signals on PC/104-PLUS
connector.