IEI Integration ICECARE 7 - Manual (Page 31)

ICECARE-07 Mobile Field Assistant
Page 20
NOTE:
The two batteries are hot swappable which means the user can replace
the battery with a fully charged battery without turning off the system.
3.4 SIM Card Installation (Optional)
To be able to use the 3.75G network connection, a SIM card must be installed in the
ICECARE-07. Follow the steps below to install a SIM card.
Step 1: Remove the battery pack 1 on the rear panel of the ICECARE-07.
Step 2: Locate the SIM card slot and insert a SIM card into it (
4
Figure 3-6 ).
Figure 3-6: SIM Card Installation
3.5 SD Card Installation
This section covers the installation of an SD card.
Step 1: Locate the SD card slot on the side panel of the ICECARE-07.
Step 2: Install the SD card in the slot.