IEI Integration AVL-3000 - Manual (Page 43)

AVL-3000 Advanced Auto Data Server
Page 29
3.7.11 VGA Monitor Connection
The AVL-3000 has a female DB-15 connector on the front panel. The DB-15 connector is
connected to a CRT or VGA monitor. To connect a monitor to the AVL-3000, please follow
the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Figure 1-2.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with,
insert the male connector from the VGA screen into the female connector on the
AVL-3000. See Figure 3-24.
Figure 3-24: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0: