IEI Integration AVL-3000 - Manual (Page 58)

AVL-3000 Advanced Auto Data Server
Page 44
Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
IO=2F8h;
IRQ=3
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3
IO=3F8h;
IRQ=3, 4
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ3, 4
IO=2F8h;
IRQ=3, 4
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4
4.3.5.1.3 Serial Port 6 Configuration
Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Disabled Disable the serial port
Enabled D EFAULT Enable the serial port
Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
IO=2E0h;
IRQ=10
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10
IO=3F8h;
IRQ=10
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ10