IEI Integration AUPS-AB10-20 v1.01 - Manual (Page 18)

AUPS Series Power Module User Manual
Page 8
1.5 Battery Specifications
The AUPS Series comes with a Li-ion smart battery. Some of the Li-ion battery
specifications are listed in Table 1-3.
AUPS-A10/AUPS-A20 AUPS-B10/AUPS-B20
Battery Model BAT-LI-2S2P3800 BAT-LI-4S2P3800
Battery Type Li-ion Li-ion
Nominal Capacity 3800 mAH 3800 mAH
Nominal Voltage 7.4 V 14.8 V
Max. Charge Voltage
8.4 V 16.8 V
Cut Off Voltage
5.6 V 11.2 V
Suggested Charge Current
(Max.)
2 A 2 A
System Continuous
Discharging Current (Max.)
7.6 A 7.6 A
The End of Charge
Condition
250 mA/min 200 mA/min
Discharge Protection UVP/OCP UVP/OCP
Charge Protection OVP/OCP OVP/OCP
Self-discharge Rate 340 uA ~ 440 uA 340 uA ~ 440 uA
Dimensions 139 mm x 47 mm x 26 mm 165 mm x 76 mm x 26 mm
Ambient Temperature 0°C ~ +40°C 0°C ~ +40°C
Storage Temperature -20°C ~ +60°C -20°C ~ +60°C
Backup 60 W/10 min 100 W/ 10 min
Table 1-3: Battery Specifications