AT&T 585-350-812 - Manual (Page 42)

3-2
ASAI Installation
Prerequisites for ASAI Installation
To install the Adjunct/Switch Application Interface feature on the CONVERSANT
Voice Information System (VIS) Version 3.1, you need the following:
■ One or more Tip/Ring cards (IVP4, IVP6, or a VRS6) with Signal Processor
installed
OR
one or more T1 cards (AYC11 or AYC3B) with Signal Processor installed
■ Network Support Utilities (1.2) Version 2.0
■ One ISDN PC Interface (IPCI) card
■ The Adjunct/Switch Application Interface feature package
■ Configurator program output
For information on installing the VIS software and hardware, refer to the CON-
VERSANT Voice Information System Software Installation and Upgrade and the
hardware installation and upgrade book for your platform.
NOTE :
Confirm that Adjunct/Switch Application Interface is installed and available
on the switch you are using. Refer to the DEFINITY Communications Sys-
tem Generic 1 and Generic 3i Installation and Test Manual , 555-230-104.