Fes7611 – Acnodes FES7611 User Manual
Page 43
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FES7611
Fanless Embedded Controller comes with
Intel Celeron M ULV 1.0GHz Processor
ƒ LBA (Logical Block Addressing): During drive accesses, the IDE controller transforms
the data address described by sector, head and cylinder number into a physical block
address, significantly improving data transfer rates. For drives greater than 1024
cylinders.
VIDEO:
This category selects the type of video adapter used for the primary system monitor. Although secondary
monitors are supported, you do not have to select the type in Setup. Available Options are as follows:
HALT ON:
This category allows user to choose whether the computer will stop if an error is detected during power
up. Available options are "All errors", "No errors", "All, But keyboard", "All, But Diskette", and "All But
Disk/Key".
BASE MEMORY:
Displays the amount of conventional memory detected during boot up.
EXTENDED MEMORY:
Displays the amount of extended memory detected during boot up.
TOTAL MEMORY:
Displays the total memory available in the system.