Lincoln Electric IM10098 CRUISER - Manual (Page 13)

A-6 INSTALLATION
CRUISER™
A-6
MANUAL STEERING MECHANISM,
ADJUSTMENT
To steer the CRUISER™ to the Right:
Loosen bolt B
Tighten bolt A to set the wheel angle.
Snug bolt B
To steer the CRUISER™ to the Left:
Loosen bolt A
Tighten bolt B to set the wheel angle
Snug bolt A
CROSS SLIDE
Each slide has 4” (102mm) of travel.
When assembling the CRUISER™ , verify that no com-
ponents at electrode potential contact the frame
throughout the entire travel distance of the slides.
The slides may be disassembled and then positioned
relative to each other.
WIRE REEL SPINDLE
• Position the wire reel spindle to prevent the reel
and electrode from contacting the tractor frame and
base.
• The wire reel spindle must be horizontal or oriented
upwards.
FIGURE A.8 - ADJUSTMENT
FIGURE A.9 - LOAD LIMITS
FIGURE A.10 - SEVERAL POSSIBLE SLIDE CONFIGURATIONS
FIGURE A.11 - WIRE REEL SPINDLE