The live view page, Axis media control – Axis Communications Fixed Dome Network Camera AXIS P3301-V User Manual
Page 9
9
AXIS P3301/-V - Accessing the Camera
The Live View page
How you customize the Live View page determines which buttons are visible. Not all the buttons described below will show up
unless configured to do so.
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile on the Live View
page. Stream profiles are configured under Video & Audio > Stream Profiles, see Stream Profiles, on page 13 for more
information.
The Output buttons control the output directly from the Live View page. These buttons are configured under Setup > Live View Config > Lay-
out.
Pulse - click this button to activate the output for a defined period of time - e.g. switching a light on for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a connected device - e.g. switch a light on/off.
The
Action buttons can trigger an event directly from the Live View page. These are configured under
Setup > Live View Config > Layout.
The
Snapshot button saves a snapshot of the video image currently on display. Right-click on the video image to save it
in JPEG format on your computer. This button is primarily intended for use when the AMC viewer toolbar is not available.
AXIS Media Control
The
AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control
for more information. AMC displays the following buttons:
The
Play/Stop button starts and stops the live video stream.
The
Snapshot button saves a snapshot of the video image on display. The Snapshot function and the target directory for
saving snapshots can be configured from the AMC Control Applet in the Windows Control Panel.
Click the
View Full Screen button to make the video image fill the entire screen area. Press Esc (Escape) on
the computer keyboard to exit full screen, or right-click and select the option to exit.
Click the
Record button to start a recording directly from the Live View page. The recording is saved in the folder speci-
fied in the Recording tab in the AMC Control Applet. Note that this button is only available when viewing with AMC.
AMC audio controls monitor the client computer’s speaker output. These controls are only available when audio is enabled.
Click the
Speaker and Microphone buttons to switch the sound off and on for the speaker and microphone, respectively.
Use the slider to control the
volume on the speaker and microphone.
When using the
Half-duplex mode, this button toggles, allowing you to speak and listen. The first icon indicates that you
can talk and the speaker attached to the camera will play your voice. The second indicates that you will hear audio from
the camera, but no audio is sent to any web client.
When in
Simplex talk mode, the icon toggles allowing you to speak, and is dimmed when you do not want other clients
to receive any audio.