Asante Technologies 65120 - Manual (Page 25)

25
3.10.2 Host Table
The SNMP Host Table screen allows you to add and remove hosts from access rights that have been
granted to community groups. The permissions GET, SET and TRAP are assigned to a community name
and then these permissions are assigned to individual machines by adding those machines and their IP
address to the appropriate community string. Host Authorization can be enabled or disabled.
3.10.3 Trap Settings
The SNMP Trap Setting allows for the enabling or disabling of authentication traps:
•
Enable: The system will generate a SNMP trap upon a host authorization failure
•
Disable: Authentication traps will not be generated
All hosts in communities with TRAP privileges will be notified when a trap condition occurs.