NOCO Genius G26000 - Manual (Page 12)

21 20
G26000
geniuschargers.com
USING THE G26000
USER INTERFACE
WICKED SMART FEATURE
ERROR CONDITION. An ERROR condition could happen for multiple
reasons. If an ERROR condition occurs, the ERROR LED and CHARGE
LEDs (25%, 50%, 75%, 100%) will blink “on” and “off” at 5Hz. For
assistance in resolving ERRORs, see the section entitled,
“TROUBLESHOOTING.”
Now That’s Smart, Wicked Smart.™
MODE BUTTON
The MODE button
is used to select
the charging modes
manually.
32V BOOST LED
A 24V charge
mode for
recovering battery
capacity from
sulfated batteries.
(14-230Ah)
SILENT NIGHT
LED
A 12V charge
mode which
disables the
internal cooling fan
for quiet operation.
(14-230Ah)
12V CALCIUM
LED
A 12V charge
mode for charging
calcium batteries.
(25-100Ah)
USING THE G26000
ERROR LED
The ERROR LED (Orange)
will illuminate when an
error condition or reverse
polarity is present.
13.6V SUPPLY LED
A 12V charge mode
for maintenance
charging or low
voltage batteries.
(14-230Ah)
24V COLD/AGM
LED
Charge mode for
24V batteries below
32°F (0°C) and AGM
batteries.
(25-250Ah)
16V BOOST LED
A 12V charge mode
for recovering
battery capacity
from sulfated
batteries.
(14-230Ah)
16V EQUALIZATION
LED
A 12V charge mode
for equalization
charging.
(14-230Ah)
24V NORM LED
Charge mode for
24V Wet, Gel and MF
batteries.
(25-250Ah)
12V COLD/AGM
LED
Charge mode for
12V batteries below
32°F (0°C) and AGM
batteries.
(50-500Ah)
12V NORM LED
Charge mode for
12V Wet, Gel and MF
batteries.
(50-500Ah)
CHARGE LEVEL
Indicates the
current charge level
of the battery.
STANDBY LED
STANDBY LED
(Green) illuminates
when a charging
mode has not been
selected.