ODL Tubular Skylight - Manual (Page 17)

17
Gloves
ladder
Metal Shears
Safety Equipment
Bottom Adjustable Tube
Ceiling Ring
TOOLS & PARTS
At the ceiling, slide the temporary shim out of your
way and pull tube section back out of the ceiling
6
Wearing protective gloves, carefully trim away the
excess aluminum tubing using your felt pen marks as
a guide.
7
Remove the protective film from the inside of the
tubing.
8
Place the tube section back into the ceiling making
sure to align and center it inside the roof flashing
collar. Place shim back across the cut-out.
9
Open the diffuser assembly box and separate the
ceiling ring from the diffuser. Install only the Ceiling
Ring into the cut-out.
10
You can now remove the shim from the ceiling and
allow the tube to rest centered over the ceiling ring.
11
18
6
6
7
9
10
11
Section-10b
Cathedral Ceiling/Short Shaft Installation