Otter Outdoors Pro Ice Resort - Manual (Page 3)

Page 3
19
13
11
14
17
17
17
17
6. Assemble Back Main Frame Bar: Insert the outer main frame bar (Item 13) into the middle main frame bar
(Item 14). Fasten with self-tapping screw (Item 17). Slide the sleeve (Item 16) over the main frame extension bar
(Item 11). (Line up holes with button lock, press lock in as you slide over the bar). Insert the black plug
(Item 18) into the main frame extension bar (Item 11). Insert outer main frame bar (Item 13) into sleeve (Item 16).
Cover end of main frame extension bar (Item 11) with black end cap (Item 19). Ref. Diagram 3.
Diagram 3
18
13
7. Attach Back main frame assembly (Assembled in Step 6) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 21). Ref. Diagram 4.
4
3
3
Back Main Frame Assembly
21
Diagram 4
16
Button
lock
11
Note:
Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
Note:
Predrilling a
3/32” hole will make
installation of
screws easier.