Poly-Tex FB6001 - Manual (Page 4)

1
2
4
3
2
3
INSTRUCTIONS:
1 INSERT BASKET PURLIN INTO BENCH ENDS.
2 SET 17 1/4" BENCH TOP ON BENCH ENDS MAKING SURE SNAP BUTTONS
PROTRUDE THROUGH HOLES IN BENCH ENDS.
3 SET LOWER 36" BENCH TOP INTO PLACE MAKING SURE FRONT EDGE IS
UNDER HOLDING TAB.
4 SET UPPER 36" BENCH TOP INTO PLACE. SECURE TO BENCH ENDS WITH
NORSTAD CLIPS AS SHOWN BELOW.
BENCH TOP
THUMB SCREW
NORSTAD CLIP
BENCH END
SUPPORT TUBE
NORSTAD CLIP
& THUMB SCREW
SNAP BUTTON MUST
PROTRUDE THROUGH
HOLE IN BENCH END.
SLIDE BENCH
TOP UNDER
HOLDING TAB