Audiovox VOH1012 - Manual (Page 5)

128-7288
5 of 16
- 5 -
Control Function Descriptions
1. POWER Button – Used to turn the system ON/OFF. Bright
red when system is on, dim when off.
2. Infrared Transmitter and Sensor – Use to transmit audio
to the wireless headphones. Also allows the remote control
to operate the VOH1012 and to control other accessories in
the system.
3. Dome Lights – Provide additional interior illumination.
4. SOURCE Select – Used to select one of the three sources
( AV1,AV2, AUX, *TV Optional).
5. ( + ) Button – Used to increase levels in the picture
adjustment mode.
6. PICTURE SELECT Button – Allows the user enter the picture
adjustment mode.
7. ( – ) Button – Used to decrease levels in the picture adjust
mode.
8. Auxiliary A/V Input – Allows input from an external source
using the supplied A/V adapter cable.
9. Rear Infrared Sensor – Allows the remote control to operate
the VOH1012 and other accessories.
10. Drop Down LCD Panel.
11. Screen release – Moves in direction of the arrow to release
the drop down screen.
12. FM Select Button – When this button is pressed it will turn
on the wireless FM Modulator and then cycle through the
available FM frequencies (Channel 1, 88.3MHz; Channel
2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz;
Channel 5, 89.9MHz and OFF).
13. IRT ON/OFF – When this button is pressed it will turn the
IR Transmitter ON/OFF for use with IR Wireless Headphone
Channel A.
14. Three position Dome Light Switch*
• Auto – Automatically switches on the dome lights in
conjunction with the vehicle’s interior illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
*Refer to Installation Guide for wiring instructions.