Audiovox VOH1012 User Manual
Page 6
Advertising
128-7288
6 of 16
-
6
-
Battery Installation
Before attempting to operate your Remote Control, install the
batteries as described below.
1)
Turn the Remote Control face down. Using a fingernail,
lift the battery cover off.
2)
Install two “AAA” batteries as shown. Make sure that
proper polarity (+ or -) is observed.
3)
Align the cover tabs with the remote control and press
down until the cover clicks.
The remote control will operate the VOH1012 and most Audiovox
VCP’s. It is not a universal remote control and will not control
equipment from other manufacturers.
Remote Control Operation
BATTERY COVER
Advertising