Qualcraft ULTRA-Jack - Manual (Page 2)

Customer Support and Ordering Information
781-344-1000 • www.qualcraft.com
removing the Ultra-Jack from the pole, or
requiring any disassembly. The workbench
fastens right onto the poles, and can be
a real time saver by providing a spacious
work area to ensure that you take the right
tools and supplies up the scaffolding with
you, promoting productivity and efficiency.
The workbench also insures safety by pro-
viding a secure place to carry tools and
materials and prevent them from becoming
a fall hazard to workers below. Another
component of the Ultra-Jack System are
the wall braces that feature a full swivel
head to cover all possible roof pitches.
These provide rigid, triangular bracing as
required by OSHA. The positive spring
loaded cam lock on the Ultra-Jack pump
mechanism provides durability, smooth
operation, and means that there is no
clutch to wear out. The Ultra-Jack pump
mechanism has a greater climbing rate per
stroke than other available pump jacks,
which allows for faster raising of the work
platform, and since it requires less strokes
and effort, results in less operator fatigue.
The foot levers that activate the lowering
mechanism, and hand crank handles that
operate the lowering gear, are padded for
extra comfort. The boot straps on the foot
levers are big enough to accommodate
large work boots.
Poles are available in 6,12, and 24 ft.
lenghts. Join any two pole lenghts together
using a pole connector, allowing a scaffold
system to reach a working height of 18 ft.,
24 ft., 30 or 48 ft. The use of aluminiun
walk planks with guardrails allows for wider
spans between poles.
ULTRA-JACK
MODEL # 2000
Usage Ideas
& Options
The Ultrajack system is a
completely integrated system
designed to maximize your
productivity and safety.
The system is configurable
with a variety of options
that accomodate mulitple
configurations and nearly any
project environment.
ULTRA-JACK BRACE model #2002
ULTRA-JACK WORK BENCH model #2004
ULTRA-JACK POLE ANCHOR model #2008
ULTRA-JACK POLE BASE
model #2009
ULTRAJACK
SYSTEM
ULTRA-JACK BRACE
POLE BASE
POLE ANCHOR
ULTRAJACK WORK BENCH