Qualcraft Seraph HUV Harness - Manual (Page 8)

Product Specific Applications
Personal Fall Arrest: Seraph Harness may be used to support a MAXIMUM 1
Personal Fall Arrest System (PFAS) for use in Fall Arrest applications. Structure must
withstand loads applied in the directions permitted by the system of at least
5,000 lbs. Maximum free fall is 6‘, or up to 12’ if used in combination with
equipment explicitly certified for such use. Applicable D-ring: Dorsal.
Restraint: Seraph Harness may be used in Restraint applications. Restraint
systems prevent workers from reaching the leading edge of a fall hazard. Always
account for fully deployed length of lanyard/SRL. Structure must withstand loads
applied in the directions permitted by the system of at least 1,000 lbs. No free fall
is permitted. Restraint systems may only be used on surfaces with slopes up to
4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
! WARNING
Use of equipment in unintended applications may result in serious
injury or death. Maximum 1 attachment per connection point.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-310 lbs.,
or up to 420 lbs. if used in combination with
equipment explicitly certified for such use.
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
6
Rescue/Confined Space: Seraph Harness may be used in Rescue/Confined
Space applications. Rescue systems function to safely recover a worker from a
confined location or after exposed to a fall. There are various configurations of
Rescue systems depending on the type of rescue. Structure must withstand loads
applied in the directions permitted by the system of at least 3,000 lbs. No free fall
is permitted. Applicable D-rings: Dorsal, Chest, Shoulder.
Work Positioning: Seraph Harness may be used in Work Positioning applications.
Work Positioning systems allow a worker to be supported while in suspension and
work freely with both hands. Structure must withstand loads applied in the
directions permitted by the system of at least 3,000 lbs. Maximum allowable free
fall is 2’. Applicable D-rings: Side, Shoulder.