Qualcraft Surveyor's Construction Tux - Manual (Page 8)

Product Specific Applications
! WARNING
Use of equipment in unintended applications may result in serious
injury or death. Maximum 1 attachment per connection point.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-310 lbs.,
or up to 420 lbs. if used in combination with
equipment explicitly certified for such use.
Guar
d
ian F
al
l Pr
o
tection
6305 S. 231s
t St
., K
e
nt
, W
A
98032
phone: (800) 466
-6385 f
ax
: (800) 670
-7892
www
.guar
d
ianf
al
l.c
o
m
6
Personal Fall Arrest: A Construction Tux Harness may be used in Personal Fall
Arrest applications as a component of a Personal Fall Arrest System (PFAS).
Structure must withstand loads applied in the directions permitted by the system
of at least 5,000 lbs. Maximum free fall is 6’, unless used in combination with
equipment explicitly certified for extended free fall. Applicable D-ring: Dorsal.
Restraint: A Construction Tux Harness may be used in Restraint applications.
Restraint systems prevent workers from reaching the leading edge of a fall hazard.
Always account for fully deployed length of lanyard/SRL. Structure must withstand
loads applied in the directions permitted by the system of at least 1,000 lbs. No
free fall is permitted. Restraint systems may only be used on surfaces with slopes
up to 4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: A Construction Tux Harness, configured with side or shoulder
D-rings, may be used in Work Positioning applications. Work Positioning systems
allow a worker to be supported while in suspension and work freely with both
hands. Structure must withstand loads applied in the directions permitted by the
system of at least 3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings:
Side, Shoulder.
Rescue/Confined Space: A Construction Tux Harness may be used in
Rescue/Confined Space applications. Rescue systems function to safely recover a
worker from a confined location or after exposed to a fall. There are various
configurations of Rescue systems depending on the type of rescue. Structure must
withstand loads applied in the directions permitted by the system of at least
3,000 lbs. No free fall is permitted. Applicable D-rings: Dorsal, chest, shoulder.
Not all Construction Tux Harnesses may be used in every
application type. ALWAYS consider harness D-ring configuration and
any other structural components. ALWAYS read and adhere to
product labeling. A Competent Person MUST make a determination
regarding correct harness application and compatibility.
! WARNING