Qualcraft Float Tux Harness - Manual (Page 15)

Labels
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
13
LG Size Tag
All labels located
on harness strap
beneath Label
Cover.
User must inspect prior to EACH use. Competent
Person must complete formal inspection every
6 months. Competent Person to inspect and initial.
Date of First Use: __________________.
20___ 20___ 20___ 20___ 20___
INSPECTION GRID
J
F
M
A
M
J
J
A
S
O
N
D
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE
DO NOT REMOVE LABELS
YR
MO
Capacity Range: 130-310 lbs., or up to 420 lbs. if used in
combination with equipment explicitly certified for such use.
Float Tux Harness
Prior to use, read and understand all manufacturer’s instructions
provided with equipment at time of shipment. This includes
Float Tux Harness manual, as well as all additional instructions
pertaining to the inspection, maintenance, and use of the
personal flotation device. ALWAYS follow all instructions.
Compliant with ANSI Z359.1-07, ANSI A10.32-12, OSHA 1910,
OSHA 1915, & OSHA 1926 Subpart M. USCG Type II & Type V approved.
! WARNING
Immediately remove from use if exposed to forces of fall arrest.
90318
(Rev. B)
Materials: Nylon, Polyester, Cotton Duck, & Neoprene.
Only make compatible connections.
Refer to instructions for proper connections and use.
Maximum 1 connection per Construction Tux Harness.
Only make connection to harness D-ring.
Product lifetime is 5 years from Date of First Use,
or, if not recorded, from Date of Manufacture,
as long as equipment passes pre-use
and Competent Person inspections.
• 1-800-466-6385 • 6305 S. 231st St., Kent, WA 98032 • www.guardianfall.com •
Improper use of this product could result in serious injury or death.
Ensure flotation mechanism is armed prior to use.
Understand all potential methods of inflation.
Not for recreational use.
Part #: DOM:
Avoid contact with sharp edges and abrasive surfaces.