Qualcraft Daytona Big Block SRL - Manual (Page 8)

Product Specific Applications
! WARNING
Use of equipment in unintended applications may result in serious
injury or death. Maximum 1 attachment per connection point.
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
6
Personal Fall Arrest: Daytona Big Block SRLs may be used in Personal Fall Arrest
applications to support a MAXIMUM 1 Personal Fall Arrest System. Structure must
withstand loads applied in the directions permitted by the system of at least
5,000 lbs. Maximum free fall is 2’. SRL may be positioned no more than 2’ below
harness dorsal D-ring. Applicable D-ring: Dorsal.
Restraint: Daytona Big Block SRLs may be used in Restraint applications. Restraint
systems prevent workers from reaching the leading edge of a fall hazard. Always
account for fully deployed length of lanyard/SRL. Structure must withstand loads
applied in the directions permitted by the system of at least 1,000 lbs. No free fall
is permitted. Restraint systems may only be used on surfaces with slopes up to
4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
For all applications: worker weight capacity range (including all
clothing, tools, and equipment) is 130-310 lbs., or up to 420 lbs. if
used in combination with equipment explicitly certified for such use.