Ramsey Winch RCH 15K HOIST User Manual
Page 17
16
DISASSEMBLY OF INPUT CARRIER 41.62 RATIO
Carrier assemblies may be purchased as a complete assembly (see pg. 21) or parts may be
purchased individually (see parts list below). If purchasing individual parts, it will be necessary to
disassemble the input gear carrier as outlined below.
1. Carefully drive roll pin #71 into carrier pin #69 so that it is captured within carrier pin #69 but
not touching the opposite side of the input carrier #66.
2. Tap carrier pin #69 to remove it from the input carrier #66.
3. Slide the planet gear #67 and the (2) thrust washers #70 from the carrier assembly #66.
Bearing #68 may then be pressed out.
4. Remove the roll pin #71 from the carrier pin #69.
ITEM #
QTY
PART #
DESCRIPTION
66
1
317031
MACHINED-CARRIER-INPUT RCH
67
3
334215
GEAR-INPUT-PLANET-RCH
68
3
402138
BEARING-NEEDEL RCH
69
3
470119
PIN-INPUT RCH
70
6
518069
WASHER-THRUST RCH
71
3
470121
SPRING PIN-1/4 X 7/8 LG
68
70
70
69
67
71
66