Ramsey Winch 100K WILDCAT WINCH User Manual
Page 16
DISASSEMBLY OF INPUT CARRIER
Carrier assemblies may be purchased as a complete assembly (see pg. 23) or parts may be
purchased individually (see parts list below). If purchasing individual parts, it will be necessary to
disassemble the input gear carrier as outlined below.
1. Carefully drive roll pin #105 into carrier pin #104 so that it is captured within carrier pin #104
but not touching the opposite side of the input carrier #101.
2. Tap carrier pin #104 to remove it from the input carrier #101.
3. Place a plastic pail in a position to catch bearings #103 and washers #106. Then slide the gear
#102 from the carrier #101.
4. Remove the roll pin #105 from the carrier pin #104.
5. Repeat this process for the two remaining gears in the carrier.
106
102
105
103
106
104
101
ITEM QTY
PART
NO
DESCRIPTION
101
1
317018
INPUT CARRIER
102
3
334206
PLANET GEAR
103
102
402135
NEEDLE BEARING
104
3
470111
PLANETARY PIN
105
3
470123
ROLL PIN
106
6
518067
THRUST WASHER
14 OM-914221-0211-b