Ramsey Winch 100K WILDCAT WINCH User Manual
Page 18
DISASSEMBLY OF INTERMEDIATE CARRIER
Carrier assemblies may be purchased as a complete assembly (see pg. 23) or parts may be
purchased individually (see parts list below). If purchasing individual parts, it will be necessary to
disassemble the intermediate gear carrier as outlined below.
1. Carefully drive roll pin #205 into carrier pin #206 so that it is captured within carrier pin #206
but not touching the opposite side of the intermediate carrier #201.
2. Tap carrier pin #206 to remove it from the intermediate carrier #201.
3. Place a plastic pail in a position to catch bearings #204, spacers #203, and washers #207.
Then slide the gear #202 from the carrier #201.
4. Remove the roll pin #205 from the carrier pin #206.
5. Repeat this process for the two remaining gears in the carrier.
201
207
202
205
204
203
204
206
207
ITEM QTY
PART
NO
DESCRIPTION
201
1
317028
INTERMEDIATE CARRIER
202
3
334204
PLANET GEAR
203
3
362307
BEARING SPACER
204
204
402136
NEEDLE BEARING
205
3
470036
ROLL PIN
206
3
470113
PLANETARY PIN
207
6
518067
THRUST WASHER
16 OM-914221-0211-b