Ramsey Winch HD-P10000X - Manual (Page 13)

11
Set winch with gear housing end down on work surface.
Install well-oiled o-rings and backup rings into grooves on outside of brake piston and backup brake piston as shown
in cross-section A-A below.
Piston, backup piston, brake discs and stators must be clean and free of grease and oil.
Insert brake discs (item #5) and stators (item #4) into gear end alternating, with stators first and last.
Insert backup brake piston (item #7) into motor end and insert brake piston (item #6) into it. Apply even pressure
on piston when installing.
Install retaining rings (item #42 and 50) into grooves in motor end housing.
SECTION A-A
4
5
35
33
7
36
31
32
34
6
42
6
7
31
36
35 33 32 34
MOTOR SIDE
DRUM SIDE
50