Ramsey Winch CHEVY GRILL GUARD KIT 295933 - Manual (Page 5)

4
FURNISHED WITH WINCH
Step 7
Mount center unit on vehicle and secure each side at the lower support bracket using (3) 1/2” X 1-1/4”
capscrews #19 with (3) 1/2” nuts #22 (Figure 16). Attach each side of center unit to upper support
bracket using (1) 3/8-16NC x 1-1/4 capscrew #18 with nut #21 (Figure 17). Do not tighten hardware.
Step 8
Install fairlead as shown below. Note that top holes in channel (Figure 22) align with bottom holes on
roller fairlead (Figure 23). Secure using capscrew, lockwasher, and nut furnished with winch.
Figure 22 Figure 23
Figure 16 Figure 17
FURNISHED WITH WINCH
FURNISHED WITH WINCH