Ramsey Winch HD-200 (JERR-DAN) User Manual
Page 10
Advertising
INSTRUCTIONS FOR OVERHAUL OF RAMSEY
MODEL HD-200 RAM-LOK®
DIS-ASSEMBLY
2. Remove clutch housing (item
#9) and clutch (item #5) from
winch assembly.
Remove two keys (item #31)
from keyways. A screwdriver
can be used, at notch, to aid in
the removal of keys. Once keys
have been removed, drum (item
#7) and thrust washer (item
#46) can be removed from
drum shaft.
1. Drain oil from gear
housing by removing
(item #36) plug from
bottom of gear
housing. Remove
plugs (items #34 &
#35) from top of gear
housing. Remove
adapter rod (item
#26) by driving pin
(item #37) from
shifter shaft of
winch. Remove
mounting frame
(item #1) from winch
by removing hardware
shown.
7
Advertising