Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 44)

Cut to Length with Multi Stroke Program
F4=EXIT MANUAL MODE
CYCLE ROLL WITH KEYS
F1=INCH MODE
Pressing the F2 key will only let the operator make a forward movement the
amount that was programmed for the feed lengths of the job. Pressing F1 will
display the following Jog Mode screen.
JOG MODE
F1=FORWARD
F2=REVERSE - OR USE
EXTERNAL JOG PENDANT
F4=EXIT (INCH MODE)
F4=EXIT
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (43 of 66) [12/10/2001 3:44:58 PM]