Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 56)

Cut to Length with Multi Stroke Program
PRESS F1 OR F2
Pressing the F1 or F2 keys will produce one of the following displays. The
lower the number entered, the longer the ramp cycle. Press F1 or F2 now.
ENTER ACCEL RAMP % JOB NUMB=00 ENTER IN
MAX%=75000 RPM/SEC PERCENT MAX VEL=000%
MAXIMUM ACCEL %=002% PRESS F4 KEY ONCE
F4=EXIT (RAMP MENU) CORRECT # IS ENTERED
Multi-stroke Program Explanation
The Multi-stroke program is a cut-to-length program with the option of cutting
different lengths with different quantities for each length within the same
program or job
number.
The program consists of 10 jobs with 10 sequences per job. Each sequence
has multiple repeats with a programmable timed output to the cutter.
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (55 of 66) [12/10/2001 3:44:58 PM]