Reelcraft Series H Hand Crank Hose Reels User Manual
Operating instructions, Series h hand crank hose reels, Important
Operating Instructions
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Series H Hand Crank Hose Reels
Low, Medium and High Pressure Model Numbers:
H16000
H28000
H18000 M
H28000 M
H18000
H28005
H18005 M
H29000 M
H18005
H29000
H18006 M
H16000 H
H19000
H29005
H19000 M
H26000 H
H26000
H16000 M
H26000 M
H28000 H
Read this manual carefully before installing, operating
or servicing this equipment.
IMPORTANT
• Ensure that reel is properly installed before connecting input and
output hoses.
• Bleed fluid/gas pressure from system before servicing reel.
• Before connecting reel to supply line, ensure that pressure does
not exceed maximum working pressure rating of reel.
• Remember, even low pressure is very dangerous and can cause
personal injury or death.
• Be aware of machinery and personnel in work area.
• If a leak occurs in the hose or reel, remove system pressure
immediately.
• A high tension spring assembly is contained within the reel.
Exercise extreme caution.
• Pull hose from reel by grasping the hose itself, not the control
valve.
• Ensure that reel, hose, and equipment being serviced are
properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove system pressure
immediately. Do not pull or jerk on hose!
• Treat and respect the hose reel as any other piece of machinery,
observing all common safety practices.
SAFETY
Personal injury and/or equipment damage may result if proper safety precautions are not observed.
Form# 830-696 Rev: 6/2013
Dimensions
H16000 (M/H)
H18000 (M)
H19000 (M)
H26000 (M/H)
H28000 (M/H)
H29000 (M)
H28005 H29005 H18005 (M) H18006 M
A
19”
19”
20 1/8” 18 7/8”
20 1/8”
20 1/8”
B
20”
20”
14”
14”
14”
14”
C
15”
15”
10”
10”
10”
10”
D
10”
16”
16”
16”
10”
6 3/8”
E
12 1/2”
18 1/2”
18 1/2” 18 1/2”
12 1/2”
8”
F
5 3/4”
5 3/4”
5 3/4”
5 3/4”
5 3/4”
5 3/4”
G
17 3/4”
17 3/4”
17 3/4” 15 3/16”
17 3/4”
17 3/4”
A
B
C
F
D E
G