Airlink101 ANAS250 User Manual
Page 23
-23-
8. What kind of hard drive is compatible with the HOMENAS?
The HOMENAS supports 3.5” Ultra DMA/ATA hard drives which are mostly
manufactured after 1998. Below is a list of manufacturer websites you can refer
to for more information on the hard drive you own.
y Western Digital
y IBM/Hitachi
y Samsung
y Seagate
y Maxtor
http://www.westerndigital.com
http://www.hitachigst.com
http://www.samsung.com
http://www.seagate.com
http://www.maxtor.com
9. What can I do when HOMENAS is not recognized?
First, make sure the Ethernet cable is properly connected. Power off and then
power it back on. If it is still not detectable, you can reset the NAS by pushing
and holding the Reset button at the back panel for 10 seconds when it is
powered on.
10. What can I do when I forget the hostname and IP address of the
HOMENAS?
Use the HomeNAS Configuration Utility included in the CD to show the
information for the HomeNAS detected.