Airlink101 ANAS250 User Manual
Page 5
-5-
Step 4
Secure the drive to the plate on the sides with the provided four screws.
Step 5
Insert the plastic plate back to the device.
Step 6
Re-attach the back panel to the device and secure it with the two screws
removed in step 1.
Step 7
Connect Home NAS to your hub, switch, or router with the provided Ethernet
cable, and connect the supplied power adapter. Plug the power cord into a power
outlet.
(Note: You can also connect this device to your computer directly via the provided
USB or Ethernet cable to use it as an external hard drive. However, the Home Nas
should not be connected with both Ethernet and USB cables at the same time.)
The Ethernet port on the HOMENAS is Auto-MDI/MDIX,
which means you can connect it using either a crossover
or a direct network cable.