Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 2)

2
• Do not allow water to enter the connector. Also, do not touch the connector if your
hands are wet. Doing so may cause an electric shock.
• Do not connect or disconnect the USB Data Transfer Cable during data transfer.
Doing so may cause a data communication error.
„Unit Disposal
• When this product unit is disposed of. it should be done so according to your coun-
try’s regulations for similar types of industrial wastes.
Package Contents
„USB Data Transfer Cable (1)
(CA3-USBCB-01)
„Installation Guide
(This Guide)
Compatible OS Types
The USB Data Transfer Cable's compatible OS depends on each Screen Editor &
Logic Program Software. Please make sure to check your USB Data Transfer Cable's
compatible OS by the Screen Editor & Logic Program Software's manuals.
This unit has been carefully packed, with special attention to quality. However, if for
any reason you find any of the contents of this package damaged or missing, please
contact your local Pro-face representative immediately.
„To Prevent USB Data Transfer Cable Damage
• Do not use the USB Data Transfer Cable at temperatures outside the range specified
in this guide.
• Do not use or store this cable at very high temperatures.
• Do not use or store this cable in direct sunlight or excessively dusty or dirty environ-
ments.
• Do not use or store this cable in an environment where it may be exposed to chemical
vapors or fumes.