Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 4)

4
„External
2 Installation
The USB Data Transfer Cable is attached to a personal computer's USB port. The
cable's other connector should be attached to the Display unit's USB port.
Also, this cable's connectors are exactly the same. Connecting either connector to
either unit will not cause any problems.
Weight 180g or less
External
Dimensions
(Cable length)
2.05m +/- 0.1m
• The Display unit and PC signals are not insulated.
• Extending the length of the cable via a USB extension cord can
degrade (weaken) signals, possibly causing an error. As a result,
do not extend the length of the Data Transfer Cable.
• When connecting the USB Data Transfer Cable to your PC or to
the Display, be sure to insert the cable's connector at the correct
90
o
angle. Failure to do so may damage either the connector or
the main unit.
• Since the data transfer cable's connector case is metal, be sure it
does not contact the charged section of any other equipment.
CA3-USBCB-01
Display
PC