Proface APL3000B - Node Box PC - Manual (Page 34)

Chapter 2 Specifications
2-7
Display Functions
Expansion Slots
*1 If “Serial” is selected, COM4 cannot be used.
*2 To change the Master/Slave setting of Primary IDE I/F, set Serial Mode Select switch
#5 pin on the circuit board to the desired position. Switches (page 2-11)
*3 Available only for reading CD/DVD-ROM and DVD-VIDEO.
*4 The clock, RTC, built-in the PS-A has a timing error. The range of the error will be
between +300 and -300 sec. / month, depending on the PS-A’s conditions such as
lifetime usage or temperature difference. If you use the PS-A in a system that takes
this error seriously, adjust the clock in regular intervals.
PS-3710 Series
Revision
*1
*1 The revision number of the PS-A is shown in the label affixed to the PS-A.
In the example shown below, an asterisk "*" is displayed in the position where "5"
should be, meaning "Rev.5".
When PS-A Rev.5 is NOT marked When PS-A Rev.5 is marked
Display Type TFT Color LCD (15 inch)
Pixel Density 1,024 x 768 pixels
Dot Pitch 0.297 x 0.297mm
Effective Display Area 304.1 x 228.1mm (11.97 x 8.98in.)
Display Colors 260,000 Colors
Backlight's Life Span CFL (Replaceable)
LED backlight (The backlight
cannot be replaced by the user.
The unit must be sent back for
backlight replacement.)
Touch Panel Brightness
Adjustment
4 Levels (Adjusted via Windows
®
Control Panel)
Contrast Control Not Possible
Display Service Life
50,000hrs.
(at 25°C and 65%RH (humidity))
Backlight Service Life
50,000hrs. or more (at ambient temperature 25°C and continuous
operation - period until backlight brightness decreases to 50% or
backlight starts to flicker)
Slot Type PCI 2.2(5V)
Board Size 235 x 106.68mm (9.25 x 4.2in.)
Power Supply Capacity DC5V DC12V DC-12V DC3.3V
Power Consumption 1.5A 0.5A 0.1A 0.5A
SEE