Proface APL3000B - Node Box PC - Manual (Page 85)

PS-3710A/PS-3711A Series Hardware Manual
3-18
(2) Insert the CF Card firmly into the CF Card slot, and check that the eject button pops out.
Removing the CF Card
For PS-3710A Series
(3) Press the eject button in fully to remove the CF Card from the CF Card slot.
(4) After inserting/removing the CF Card, be sure to replace the CF Card cover and secure it in place using
the attachment screw.
For PS-3711A Series
(3) Press the eject button in fully to remove the CF Card from the CF Card slot.
(4) After inserting/removing the CF Card, be sure to replace the CF Card cover and secure it in place using
the attachment screw.
Backup of CF Card
The CF Card has a data overwrite limit of approximately 100,000 times. Therefore, be sure to back up all
CF Card data regularly to another storage media. (100,000 times assumes the overwriting of 500KB of data in
DOS format.)
< If your PC is equipped with a PC Card Slot >
(1) Install the CF Card into a CF Card Adapter (GP077-CFAD10) and insert it into a PC card slot of a
personal computer.
(2) Save the data of the CF Card with your personal computer.
<If your PC is NOT equipped with a PC Card slot>
(1) Use a commercially available PC Card Reader, or a CF Card Reader.
• The necessary torque is 0.5N • m to 0.6N • m.
CF Card
Eject Button