Proface APL3000B - Node Box PC - Manual (Page 15)

PS-3650A/PS-3651A Series Hardware Manual
1-2
1.1 System Design
The following diagram illustrates the standard range of items that can be connected to the PS-A unit.
• This diagram shows only the PS-A unit’s internal layout and connectable devices.
The user’s actual design may differ.
PS-3650A/PS-3651A Series
Inside PS-A
unit
Bottom of PS-A
unit
Side of PS-A
unit
Front of PS-A
unit
COM1/COM2
* 3
SATA Connector
LAN Connector
(2 ports)
PCMCIA Slot
(1 port, TypeII)
Expansion Board
Slot *
5 (1 port)
*1 Built-in accessory only
*2 The Pro-face's optional devices used with the PS-A. Please refer to “1.2 Accessories” for details.
*3 COM2 is an interface for Serial 2 port type model only.
*4 RAS is interface for RAS port type model only.
*5 PS-3651A Series does not have an expansion board slot. PS-3650A Series only does.
USB Connectors
(4 ports)
USB Connector
(1 port)
CF Card Slot
(1 port, TypeII)
Speaker Out Connector
Hub
Speaker
CF
Central Network Line
HDD Unit
*¹*²
DIM Module
*¹*²
CF Cards
*²
CF CF Cards
*²
Main Memory
Connector
Peripherals
(commercial type)
USB 2.0 Compatible
Peripherals(commercial type)
USB 1.1 Compatible
Peripherals(commercial type)
PCI Board
(commercial type)
CF Card Adaptor
*²
PCMCIA Card
(commercial type)
Pin-jack Cable
(commercial type)
LAN1:10BASE-T/100BASE-TX Cable (commercial type)
LAN2:10BASE-T/100BASE-TX/1000BASE-T Cable (commercial type)
Serial Cable
RAS Connector
* 4
RAS Cable (Your own cable)