Proface APL3000B - Node Box PC - Manual (Page 32)

Chapter 2 Specifications
2-9
2.3.2 RAS Interface
Types of sockets for D-sub 9 pins are listed below.
Use #4-40 (UNC) fixing clamps to fix the joint of the interspace.
„ General Input (DIN 0, 1)
„ General Output (DOUT 0, 1)
Pin
Arrangement
Pin No. Signal Name Meaning
1 +12V
Output Current:100mA or less
Output Voltage: DC12V±5%
2 DOUT 0 (+) Data Output 0(+)
3 DOUT 1 (+) Data Output 1(+)
4 DIN 0(+) Data Input 0 (+)
5 DIN 1(+) Data Input 1 (+)
*1
*1 DIN1(+) can be used as Remote Reset Input of RAS feature. The factory setting is Gen-
eral Purpose Signal Input.
6 GND SG (same as FG)
7 DOUT 0 (-) Data Output 0 (-)
8 DOUT 1 (-) Data Output 1 (-)
9 DINCOM DIN GND Common
INPUT VOLTAGE RANGE DC12V to 24V
INPUT CURRENT Below 10mA
INNER RESISTOR 3.6K
Ω
INSULATION VOLTAGE AC500V or more
INSULATION Photocoupler
OUTPUT VOLTAGE RANGE DC24V
OUTPUT CURRENT Below 120mA
INSULATION VOLTAGE AC500V or more
INSULATION Photocoupler
• For the circuit diagram, refer to "6.1.1 RAS Features".
9
6
5
1