Proface APL3000B - Node Box PC - Manual (Page 19)

PS-3710A / PS-3711A Reference Manual
1-12
1.4 PS-A Dedicated Software
1.4.1 Driver
Five types of dedicated PS-A drivers (Chipset, Audio, Graphic Accelerator, LAN and Touch Panel Driver
(Mouse Emulator) ) are available.
If you purchased the PS-A with no pre-installed OS, download the drivers from the Pro-face support site
“Otasuke Pro!”. (A PS-A unit that has been recovered using the Recovery Media will have all the required
drivers installed.) For the procedure and precautions regarding the installation, visit the download page at the
“Otasuke Pro!” site.
The explanation given in this section assumes that the [Proface] folder has been created on drive C.
„ Chipset Driver
Chipset driver made by Intel
®
.
Installing the driver enables OS to recognize USB or Core PCI and use them properly.
„ Audio Driver
AC97 Audio Codec driver made by Realtek.
Installing the driver enables the sound functions to be available.
„ Graphic Accelerator Driver
Display driver made by Intel
®
.
Installing the driver enables to display the screens properly.
„ LAN Driver
Gigabit Ethernet Controller driver made by Realtek.
Installing the driver enables LAN2 to be available.
• Do not uninstall the drivers which have been installed in the PS-A unit.
• For the installation procedure and cautions, refer to the download page at the Otasuke Pro! site.
URL http://www.pro-face.com/otasuke/
• LAN1 is the standard driver. You are not required to install a LAN driver.
• The LAN2 port can be used for starting the PS-A via LAN.
SEE
3.7 Restarting/Shutting Down the PS-A from a Remote Server (page3-25)