Watlow MLS - Manual (Page 62)

50 MLS User’s Guide
Using the MLS
• Switch between Bar Graph and Single Loop display.
Press the "Enter" key to:
• Store data or a menu choice after editing.
• Go on to the next menu.
• Start scanning mode (if pressed twice).
• Press this key to change the loop setpoint.
Press the Man/Auto key to:
• Toggle a loop between manual and automatic control.
• Adjust the output power level of manual loops.
• Automatically tune the loop.
Ramp/Soak isn't available for the standard MLS. When pressing this
key, a message appears: OPTION UNAVAILABLE.
Press Alarm Ack to:
• Acknowledge an alarm condition.
• Reset the global alarm digital output.
Enter
Chng SP
Man/Auto
Ramp/Soak
Alarm Ack