Watlow Series 102 - Manual

Series 102
User’s Manual
On-off Temperature
Controller
1241 Bundy Boulevard, P.O. Box 5580, Winona, Minnesota USA 55987-5580
Phone: +1 (507) 454-5300, Fax: +1 (507) 452-4507, Internet: http://www.watlow.com
The Watlow Series 102 is a 1/16 DIN, on-off
temperature controller with a thermocouple or RTD sensor
input.
The compact size of the controller allows more flexibility
in applications where space is a problem. The Series 102 has
a standard integral setpot and front panel LED output
status indicator.
(1915)
Control Mode
• On-off
• Nominal switching hysteresis, typically 3°F (1.7°C)
Operator Interface
• Sealed membrane front panel
• LED indication of output status
• Dial scale calibrated to compensate for sensor non-linearities
• Integral set point
• Dual temperature scale (°F and °C)
Input
• Thermocouple or platinum RTD available
• Thermocouple with automatic cold junction compensation
• Thermocouple may be isolated or grounded
• Thermocouple and RTD break protection de-energizes output
• 2- or 3-wire RTD input, 100
Ω
, 500
Ω
or 1000
Ω
@ 0°C calibrated for
0.003850
Ω
/
Ω
°C curve, factory selectable
Output
• Electromechanical relay, 3A, Form C, SPDT: 3A @ 240V
Å , 3A @
28V Î (dc), resistive, 240V~ 275 VA pilot duty rated
• Solid-state relay, Form A, 0.5A @ 24V Å min., 264V Å max., opto-
isolated, zero cross switching
• Switched dc configuration; switched dc supply voltage 3 to 32V Î
(dc) into a minimum 500
Ω
load
Accuracy
Adjustable Set Point
• Calibration accuracy: ±1% of span, at 77°F ±5°F (25°C ± 3°C)
ambient and rated line voltage ± 1%
• Set point accuracy: ±3% of dial scale
• Accuracy span: 1000°F (540°C) minimum
Fixed Set Point
• Calibration accuracy: ±10°F/±6°C of setting, at 77°F ±5°F (25°C
±3°C) ambient and rated line voltage ±1%
Temperature Stability
• Thermocouple: Typically 5µV/°F ambient (9µV/°C ambient) input
referenced
• RTD: Typically 0.2°F/°F ambient (0.2°C/°C ambient)
Voltage Stability
• ±0.01% of span (min span of 1000°F or 540°C) per % of rated line
voltage
Agency Approvals
• CE: EN61010 - Safety
EN61326 - Industrial Immunity, Class B Emissions
Installation Category 2, Pollution Degree 2
• 873, File #E43684
• to C22.2 No. 24, File #E43684
• Approved for use in commercial cooking applications
Terminals
• Screw clamp terminal: 12- to 26-gauge wire
Power
• 120V~, +10%/-15%, 50/60 Hz
• 230V~ to 240~, +10%/-15%, 50/60 Hz
• 10VA maximum power
Operating Environment
• 32 to 131°F (0 to 55°C)
• 0 to 90% RH, non-condensing
• Storage temperature: -4 to 185°F (-20 to 85°C)
Dimensions
• Height: 2.1 in (55 mm)
• Width: 2.1 in (55 mm)
• Depth: 4.0 in (102 mm)
• Behind panel: 3.50 in (89 mm)
• Front panel: 0.5 in (13 mm)
Weight
• 0.7 lb (0.3kg)
UL® is a registered trademark of Underwriter’s Laboratories, Inc.
Note: Specifications subject to change without notice.
Specifications
General Description
$5.00 Made in the U.S.A.
Printed on Recycled Paper
10% Postconsumer Waste
0600-0004-0006 Rev C
August 2000
Supersedes: 0600-0036-0002 Rev B
Registered Company
Winona, Minnesota USA
T T T TO O O O O A A A AL L L L
3Y Y Y Y Y Y Y Y W ranty arran ran ran W W
S ON