Watlow Series 942 - Manual (Page 26)

Setup, Chapter 4
26
WATLOW Series 942 User's Manual
Setup
dAtA
bAud
Addr
Prot
LOg
Int
tAg
PStr
Input Type Sensor Range Low Sensor Range High
J 32
°
F/0
°
C 1382
°
F/750
°
C
K (appears as H) -328
°
F/-200
°
C 2282
°
F/1250
°
C
t -328
°
F/-200
°
C 662
°
F/350
°
C
n 32
°
F/0
°
C 2282
°
F/1250
°
C
Pt2 32
°
F/0
°
C 2543
°
F/1395
°
C
c 797
°
F/425
°
C 4200
°
F/2315
°
C
r 32
°
F/0
°
C 2642
°
F/1450
°
C
S 32
°
F/0
°
C 2642
°
F/1450
°
C
b *32
°
F/0
°
C 3092
°
F/1700
°
C
rtd (1
°
) -328
°
F/-200
°
C 1112
°
F/600
°
C
rt.d (0.1
°
) -99.9
°
F/-99.9
°
C 392.0
°
F/200.0
°
C
0-5 (VDC) -5.00/-50.0/-500 35.00/350.0/3500
420 (mA) -5.00/-50.0/-500 35.00/350.0/3500
* b t/c: Useable
range is suggested
to be 1598 to 3092
°
F
or 870 to 1700
°
C.
Range is at 32
°
to
allow using at low
temperatures
without range low
sensor errors.
NOTE:
Profile Start: Selects whether the profile starts at the current set point value or
the current process value.
Range: Proc or StPt
Range: StPt
Baud: Represents the current baud rate for serial communications. This
parameter appears if your Series 942 has communications.
Range: 300, 600, 1200, 2400, 4800, 9600
Default: 1200
Data: Allows the user to select the data bits and parity for communication.
This parameter appears if your Series 942 has communications.
Range: 7 o = 7 data bits and odd parity
Default: 7 o
7 E = 7 data bits and even parity
8 n = 8 Data bits and no parity
Protocol: Selects the communication protocol. This parameter appears if your
Series 942 has communications.
FULL = ANSI X3.28 2.2 - A.3
On = XON - XOFF
Range: FULL or On Default: FULL
Address: Selects the address for this unit if Prot = FULL. This parameter
appears if your Series 942 has communications.
Range: 0 to 31
Default: 0
Log: Selects the data logging function for a printout of the data. This parame-
ter appears if your Series 942 has communications, and Prot = On.
Range: On or OFF
Default: OFF
Interval: Selects the time interval for the logging function This parameter
appears if your Series 942 has communications, Prot = On, and Log = On.
Range: 0.0 to 60.0 minutes
Default: 0.0
Tag: Selects what variables are to be transmitted out during the data logging
function. This parameter appears if your Series 942 has communications,
Prot = On, and Log = On.
P = Process
S = Set Point A = Auxiliary Status
Range: PSA, PS-, P-A, P--, -SA, -S-, --A, --- Default: ---
Table 1- Input Ranges