Apple Multiple Scan 1705 Display (17-inch CRT) - Manual (Page 18)

5 Connect the other end of the display cable to the display port (marked with
™
) on the
back of the computer.
If you installed a video card in your computer, connect the display cable to
the video card’s port. For more information about installing video cards, see
the manual that came with your computer or video card.
6 Tighten the thumbscrews on the connection.
Turning the display on
To turn on the display for the first time:
1 Press the Power button on the front right side of the display.
2 Start up your computer.
The green power indicator light goes on. If the green light does not go on,
press the Power button again. If this doesn’t work, make sure you’ve
connected the display to your computer properly (see “Connecting the
Display to Your Computer” earlier in this chapter).
To make full use of the features available to you with this display, install the
display software.
Power button Power indicator light
Display port icon
Display cable
10 Chapter 1