Watlow SpecView from Watlow - Manual (Page 27)

SpecView from Watlow  27  Watlow Addendum
3) Click Show New.
4) In the Variables list
click the button
next to Watlow
Modbus.
5) Select the instrument
you want to add. See
the table below.
6) Click Add Item.
For This Controller…
From this Protocol
Driver…
Add These Instruments…
With Address
String…
EZ-ZONE PM Watlow Modbus
See Using EZ-ZONE Controllers with Modbus on
page 11.
EZ-ZONE PM Express
Controller Watlow Modbus
EZ-ZONE PM Express
Limit Watlow Modbus
EZ-ZONE RM Watlow Modbus
EZ-ZONE ST Watlow Modbus
7) In the Add/Rename
Instrument dialog for
Port select TCP/IP.
8) In the Address field
insert the address
string. See Using EZ-
ZONE Controllers
with Modbus on page
11. For example,
“10.3.37.105,1,0;360”
9) Click Create.