Watlow Silver Series - Manual (Page 45)

Creating a Sample Project 37
12. Click OK and place the Set Word Object below the bargraph on Window 11 in EasyBuilder. You can click and
drag it to adjust its position once you have placed it on the window.
13. Click on the screen to deselect the Set Word Object, then double-click on it to reopen the properties (or
right-click on it and select Attribute) and click the Profile tab (the Profile tab is not available when creating a
new object). Set the Width and Height to 60 (pixels).
14. Click OK to accept the new profile settings.
15. Now we will create another Set Word Object to lower the level of the tank. Select the Set Word Object that
we just created and copy it (Edit > Copy or Ctrl+C on the keyboard).
1010-1007, Rev. 10