Product features, Getting started, Product features getting started – Actiontec electronic 56K User Manual

Page 5

Advertising
background image

5

Product Features

This 56K* PnP (Plug-N-Play)† External Call Waiting Modem allows your computer
to connect to an ISP supporting V.90 or K56Flex

protocols (depending on your

model). This manual describes the hardware and software installation procedures for
your new 56K or external modem.

Conforms to the ITU-T V.90 specification with auto-negotiation of V.90, V.34,
V.32bis, V.32, V.23, V.22bis, V.22, V.21, Bell 212A, and Bell 103 protocols.

Supports Group 3: class 1 fax protocols.

V.42bis and MNP 5 data compression. MNP2 - MNP4, V.42, and LAPM error
correction.

Completely controller-based PCI modem for the widest range of supported
operating systems: DOS, Windows (3.1x, 95, 98, and NT), OS/2, UNIX, Linux

Full-duplex

Call Waiting

*The External 56K Call Waiting Modem is capable of 56K downloads. However, due to FCC rules which restrict the power output of
your ISP’s modems, current download speeds are limited to 53K bps. Depending on the conditions of your telephone lines, full 53K bps
connections may not be achieved. In these cases, you will achieve speeds up to 53K bps.

† “Plug-N-Play” installation is dependant upon your operating system and computer hardware. Some systems do not support Plug-N-
Play.

Getting Started

This package contains:

External 56K Call Waiting Modem

User’s Manual

Voice/Fax Data Communications Software

serial cable

telephone cable

power adapter

A Bonus Software CD

Advertising