Yokogawa ADMAG CA - Manual (Page 2)

IM 1E8B0-01E
2-1
2. HANDLING PRECAUTIONS
2. HANDLING PRECAUTIONS
This instrument has been already tested thoroughly at the factory. When the instrument
is delivered,please check externals and make sure that no damage occurred during
transportation.
In this chapter, handling precautions are described. Please read this chapter thoroughly at
first. And please refer to the relative matter about other ones.
If you have any problems or questions, please make contact with Yokogawa sales office.
2.1 Checking Model and Specifications
The model and specifications are shown on the Data Plate of the flow converter. Please
comfirm the specifications between the instrument that was delivered and the purchase
order (refer to the section 10.4 Model and Suffix Code).
Please let us know Model and Serial No. when making contact with Yokogawa sales
office.
MAGNETIC FLOWMETER
Made In
MODEL
SUFFIX
SIZE
STYLE
SIZE
METER
FACTOR
SUPPLY
FULL SCALE
30V DC 0.2 Amax.
4 - 20mA
(0 - 750
Ω)
–10~120
–0.1~
–20~50
PULSE
OUTPUT
LINING
MATERIAL
CURRENT
OUTPUT
FLUID TEMP.
FLUID PRESS
AMB. TEMP.
No.
mm
VDC 13W
°C
MPa
°C VAC~47–63Hz 36VA 13W
CERAMICS
Figure 2.1 Data Plate
2.2 Accessories
When the flowmeter is delivered, make sure that the following accessories are in the
package. Spare fuse can be applied only to this product.
• Data sheet (1-sheet)
• Unit labels (1-sheet)
• Centering device (1-set)
• Plug (for DC power supply only) (1-piece)
• Hexagonal Wrench (only for hazardous duty type instrument) (1-piece)