Yokogawa ADMAG CA - Manual (Page 7)

IM 1E8B0-01E
10-8
10. OUTLINE
10.5 Optional Specifications
ITEM
Waterproof Gland
Waterproof Gland with
Union Joint
Gasket for PVC pipe
(Note 4)
Lightning Protector
BRAIN Communication
Epoxy Coating
High Anti-corrosion Coating
Material Certificate
Bolt & Nut Assembly
(Note 1)
TIIS(JIS) Flameproof
(Note 2) (Note 3)
Flameproof Packing Adapter
for JIS Flameproof(Note 3)
FM Approval (Note 2)
CSA Certification (Note 2)
Specification
Waterproof Glands are attached to Power and
signal wiring ports. For JIS G1/2 only.
Waterproof Glands(union joint) are attached to
Power and signal wiring ports. For JIS G1/2 only.
Gaskets are attached between earth ring
and flow tube.
Built-in Lightning Protector(Only for 24VDC version)
Digital communication with BRAIN protocol
Coating is changed to Epoxy coating.
Coating is changed to three-layer coating
(Urethane coating on two-layer epoxy coating)
Reproduced material certificate for earth ring.
Carbon steel bolts/nuts and chloroprene gaskets
assembly.
Carbon steel bolts/nuts and non-asbestos PTFE-
wrapped gaskets assembly.
Stainless steel bolts(SUS304)/nuts(SUS403)
and chloroprene gaskets assembly.
Stainless steel bolts(SUS304)/nuts(SUS403)
and non-asbestos PTFE-wrapped gaskets assembly.
TIIS(JIS) Flameproof type
One Flameproof Packing Adapter and a blind plug are
attached.
Two Flameproof Packing Adapters are attached.
FM Explosionproof
CSA Explosionproof
Use
General Purpose Ex.Proof
CA***SG CA***SC CA***SN
Code
A : Available N : Not available
A
A
A
A
A
A
A
A
A
A
A
A
N
N
N
N
N
A
A
A
A
A
A
A
A
Mirror Finished Ceramics
180deg. Rotate Converter
Oil-prohibited Use
Oil-prohibited Use with
Dehydrating Treatment
Hydrostatics Test Certificate
Calibration Certificate
Mirror Finishing on the inside of ceramic tube
(Rmax. <= 1micro-meter)
180deg. rotate converter for reversed flow direction
Degreased cleansing treatment
Degreased cleansing treatment; Packing with
desiccant
Test pressure depends on process connection (Test
duration 10minutes) Test result is full in NOTE of QIC.
Level2: Declaration and Calibration Equipment List
Level3: Declaration and Primary Standard List
Level4: Declaration and YOKOGAWA Measuring
Instruments Control System
N
N
A
A
A
A
A
A
A
A
A
A
Note3
Note3
Note3
N
N
A
A
A
A
A
A
A
A
N
N
A
A
A
A
A
A
A
A
A
A
N
N
N
A
A
A
A
A
A
A
A
A
A
/ECG
/ECU
/FRG
/A
/BR
/EPF
/X2
/M01
/BCC
/BCF
/BSC
/BSF
/JF3
/G11
/G12
/FF11
/CF11
/MRR
/CRC
/K1
/K5
/T01
/L2
/L3
/L4
Note 1: It is available only for JIS 10K wafer, JIS 20K wafer or ANSI 150 wafer type.
2: It is available only for size 15 to 100mm (0.5 to 4 in).
3: Select optional code /JF3 with /G11 or /G12 in case of requirement of JIS Flameproof type.
/G11 is selectable only for DC power supply and 4-conductor cable use.
4: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of
inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant
facilities. It is also possible that the instrument itself can be damaged and that fragments from the instrument can contaminate the
user's process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite,
and high-temperature steam (150 °C [302°F] or above).
Contact Yokogawa for detailed information of the wetted parts material.