Yokogawa MLX - Manual (Page 3)

Page 3 of 49
IM 60A02S01-01E-A
1. Introduction
Thank you for purchasing the Model MLX Loop Powered Process Indicator. Your Model MLX
Process Indicator was precisely calibrated at the factory before shipment. To ensure both safety
and efficiency, please read this manual carefully before you operate the instrument.
The Model MLX field mounted indicator receives DC current signals from electronic transmitters
and indicates process measurement values. This instruction manual gives instructions on
handling, mounting, and wiring of the indicator.
■ Regarding This Manual
• This manual should be provided to the end user.
• The contents of this manual are subject to change without prior notice.
• All rights reserved. No part of this manual may be reproduced in any form without
Yokogawa’s written permission.
• Yokogawa makes no warranty of any kind with regard to this manual, including, but not
limited to, implied warranty of merchantability and fitness for a particular purpose.
• If any question arises or errors are found, or if any information is missing from this
manual, please inform the nearest Yokogawa sales office.
• The specifications covered by this manual are limited to those for the standard type under
the specified model number break-down and do not cover custom-made instruments.
• Please note that changes in the specifications, construction, or component parts of the
instrument may not immediately be reflected in this manual at the time of change,
provided that postponement of revisions will not cause difficulty to the user from a
functional or performance standpoint.
• Yokogawa assumes no responsibilities for this product except as stated in the warranty.
• If the customer or any third party is harmed by the use of this product, Yokogawa
assumes no responsibility for any such harm owing to any defects in the product which
were not predictable, or for any indirect damages.
• The following safety symbols are used in this manual: